[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Throttle Cable



My '96 RT had/has a single cable.  It looks like two cables as there are two
sheaths but the actual cable is a single piece which goes from the grip to the
left TB, around the pulley and then through the second sheath to the right TB.
Perhaps the very early 94's had two cables, but I think most of the production
up to the point of adding the junction box used a single cable.  

Davis Eichelberger

> -----Original Message-----
> From: owner-oilheads@xxxxxxxxx 
> [mailto:owner-oilheads@xxxxxxxxx] On Behalf Of Tom Brown
> Sent: Monday, January 26, 2004 10:41 AM
> To: BMW Oilhead List
> Subject: Throttle Cable
> 
> 
> Clive:
> 
> I think there is a seperate cable between the two throttle 
> bodies on the
> older Oilheads.   It's not one long cable going to both 
> sides.  Two seperate
> cables.  Two part numbers.
> 
> >Peter and Tom,
> 
> >Tom has given you very good advice.  However, when (if) you 
> get the new
> cable you will notice that it comes in one "piece" which 
> wraps around the LH pulley and goes on to the RH pulley.  
> Nipples locate in each pulley.
> 
> -TB

------------------------------