Synchin TB and now popping?

[Brian <brian@xxxxxxxxxxxxx>]

OK first time to do any of this but it shouldn't be a problem with my 
mechanical background.  I adjusted the valves no problem and now I 
hooked up some vac. gages.  I've adjusted them to within 1/4" and when 
hot the bike seems to run just fine.  I just went out and fired it up 
and it's snap, crackle and pop?  I'll rehook up the gages and see what's 
happening but I'm thinking I'll try out the 0=0 method if this is not 
going to work.  Any thoughts?  Bueller?

- -- 
Brian Diver
PDQ Signs   Everett, WA 
www.pdq-signs.com   

------------------------------