[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: It's A Gas <burp!>



On 04/15/2011 02:05 PM, Mick wrote:
Martin,
More than likely it's your hose clamps on the pressure side of the fuel lines. They tend to lose tension after a few years and they need tightened. If they are the factor clamps (oetiker) you'll need the tool or a good pair of dykes.
http://www.oetiker.us/

Thanks; I'll keep that in mind. One thing I should have said but didn't is that this bike has the QD connectors with the metal bodies, not the plastic bodies, so it's unlikely to be a crack in the fitting itself, but a loosening hose clamp is always a possibility.

- Martin

--
Martin Lodahl of Auburn, California
UNIX Pro, Musician, Motorcyclist