OpenBSD 3.1-current (BLACKIE) #1: Tue Apr 23 06:23:38 PDT 2002
    marc@blackie.snafu.org:/sys/arch/i386/compile/BLACKIE
cpu0: Intel Pentium III (Tualatin) ("GenuineIntel" 686-class) 1.14 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 267366400 (261100K)
avail mem = 244613120 (238880K)
using 3289 buffers containing 13471744 bytes (13156K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e0) BIOS, date 03/07/02, BIOS32 rev. 0 @ 0xfd7e0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 67%
apm0: AC on, battery charge high, charging
pcibios0 at bios0: rev. 2.1 @ 0xfd770/0x890
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xe000 0xce000/0x1000 0xcf000/0x1000 0xdc000/0x4000! 0xe0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x3575 rev 0x02
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x3576 rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 SuperSavage" rev 0x05
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "Texas Instruments PCI1420 PCI-CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 0 function 1 "Texas Instruments PCI1420 PCI-CardBus" rev 0x00: irq 11
wi0 at pci2 dev 2 function 0 "Intersil PRISM2.5 Mini-PCI WLAN" rev 0x01: irq 11
wi0: PRISM 2.5 ISL3874A(PCI), Firmware 1.0.7 (primary), 1.3.6 (station), address 00:20:e0:8b:63:7f
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x41: irq 11, address 00:d0:59:b7:ee:93
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA, (partial support), channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHN2300AT>
wd0: 16-sector PIO, LBA, 28615MB, 16383 cyl, 15 head, 63 sec, 58605120 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
pciide0:0:0: using DMA data transfers
"Intel 82801CA/CAM SMB" rev 0x01 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97 Audio" rev 0x01: irq 11 ICH3 AC97
ac97: codec id 0x43525936 (Cirrus Logic CS4299 rev 6)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4840 netmask 4840 ttymask 5842
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302