[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 4-way switch??



	You got it. Hold in the cancel switch, hit the hazard switch,
open the hazard switch, release the cancel switch. Settings are
running lights off, low, (medium?) and high. You can also change
the # of flashes before the cancel kicks in. Read the
instructions again, or give the guy at Kisan a call, he is very
helpful! I had a LOT of trouble with this too, but eventually it
worked. Don't know what the deal was.

- -----Original Message-----
From: owner-oilheads@xxxxxxxxx
[mailto:owner-oilheads@xxxxxxxxx]On Behalf Of Mark Mendel
Sent: Monday, March 22, 2004 9:09 PM
To: oilheads@xxxxxxxxx
Subject: 4-way switch??

I installed a Kisan Signal Minder on my R1100RT.  I frequently
forget to
cancel the turn signal, so it's probably a good thing for me.

However, it also keeps the turn signals on at low intensity as
running
lights.  That's OK, I suppose, but both turn signal indicators
are also
on at low intensity.  THAT is annoying.

Fortunately, the instructions say that that can be disabled by
"pressing
and holding the Cancel switch, then pressing the 4-way switch".

What the heck is the 4-way switch??    I tried using the hazard
light
switch, figuring that was another input, but that didn't do it.

Has anyone figured it out?

- --
 Mark Mendel
R1100RT, R80/7
Minneapolis, MN

------------------------------