[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- From: "Dutch Beemer" <oilheads@xxxxxxxxxxxxxxxx>
- Date: Sun, 18 Feb 2007 00:03:52 +0100
- Subject: R1100S TBS
I just performed a throttle body sync on my R1100S today, which was a bit of
a pain. That is, until I figured out the right side pulley was not entirely
against the stop, causing the butterfly valve to be ever so slightly opened.
So now everything is in sync, both at idle and off idle but I can't get the
idle rpm any lower than 1100-1200rpm. Not while keeping idle sync that is.
This seems a tad high? How important is idle sync?
It was suggested that there may be a leak between the rubber sleeves holding
the throttle bodies or by the throttle shafts. Can someone explain to me how
do I check if there are leaks?
Anyone have any tips or suggestions to share with me?
throttlemeister <at> sport-touring <dot> eu
afterburn <at> crashdot <dot> com
"Why geeks like UNIX: unzip, strip, touch, finger, grep, mount, fsck, more,
yes, fsck, fsck, fsck, umount, sleep."
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.18.1/690 - Release Date: 2/16/2007