[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: What you can really expect from GS intake/timing/valve lash mods



On Thu, 22 Nov 2007 19:07:53 -0800 (PST), you wrote:

>I've been reading about a variety of low buck things
>to do that will improve midrange, and it seems that
>advancing static advance 2-3 degrees, installing the
>GS intake tracts, and increasing valve lash a bit
>optimize low and midrange performance.  I'll not be
>replacing the exhaust or doing anything to extend
>torque above 6000 RPM so this work seems to be the
>thing to do.  Who has done these things, and what
>tangible difference did these changes make?  This
>sounds like something I could do over Christmas (If I
>get the manual) if there are real benefits to it.

What bike?  I recall that R1xxxR's have the GS tubes alreads.  
Wayne Woodruff
http://www.2zars.com