Tuesday, July 30 2013 [871 miles]
I was reminded by reading something on adventure rider that I’d not yet installed the Enduro Pro plug. Not that I ever expct to use Enduro Pro mode. Installing the plug not only enables that mode but also enables remembering the current riding mode/suspension/ABS/ASC setting over power cycles. I think. I’m installing the plug to find out.
![Enduro pro socket](./t-132111357-0728.jpg)
Enduro pro socket
![Enduro pro plug](./t-132111357-0729.jpg)
Enduro pro plug
![Cap is hard to remove](./t-132111359-0730.jpg)
Cap is hard to remove
![Enduro pro enabled](./t-132111407-0731.jpg)
Enduro pro enabled
The protective cap was a pain to remove. It was held on by a significant amount of friction in addition to a latch. I finally had to grab the cap with a pair of pliers and pull while depressing the latch to remove. After installing the plug I turned on the ignition and verified that the little plug icon was displayed near the riding mode display. Yep.